Sorbic Acid Emprove (9025)
ürün Kodu : 100662.9025Sorunuz!
100662.9025
Sorbic acid EMPROVE® (9025)
Ürün bilgisi
Grade
Ph Eur,BP,NF,FCC,E 200
Synonyms
2,4-Hexadienic acid
Hill Formula
C6H8O2
HS Code
2916 19 95
EC number
203-768-7
Molar mass
112.13 g/mol
CAS number
110-44-1
Kimyasal ve fiziksel veri
Ignition temperature
>130 °C
Solubility
1.6 g/l (20 °C)
Melting point
132 - 135 °C
Molar mass
112.13 g/mol
Density
1.2 g/cm3 (20 °C)
Bulk density
650 kg/m3
pH value
3.3 (1.6 g/l, H2O, 20 °C)
Boiling point
ca.228 °C (1013 hPa) (decomposition)
Vapor pressure
0.01 hPa (20 °C)
Flash point
127 °C
GHS'e göre güvenlik bilgisi
Hazard Statement(s)
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary Statement(s)
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word
Warning
Hazard Pictogram(s)
Storage class
10 - 13 Other liquids and solids
WGK
WGK 1 slightly water endangering
Disposal
3
Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.
Güvenlik bilgisi
R Phrase
R 36/37/38
Irritating to eyes, respiratory system and skin.
S Phrase
S 22-24/25
Do not breathe dust.Avoid contact with skin and eyes.
Categories of danger
irritant
Hazard Symbol
Irritant
Nakliye bilgisi
Declaration (railroad and road) ADR, RID
Kein Gefahrgut
Declaration (transport by sea) IMDG-Code
No Dangerous Good
Declaration (transport by air) IATA-DGR
No Dangerous Good
Toksikolojik veri
LD 50 oral
LD50 rat 7360 mg/kg
LD 50 dermal
LD50 rat > 2000 mg/kg
Spesifikasyonlar
Assay (acidimetric, calc. on anhydrous substance)
99.0 - 101.0 %
Identity
passes test
Appearance of solution (5 %; ethanol 96 %)
passes test
Melting range
- lower value
≥ 133 °C
- upper value
≤ 135 °C
Heavy metals (as Pb)
≤ 0.0010 %
As (Arsenic)
≤ 0.0003 %
Cd (Cadmium)
≤ 0.001 %
Cu (Copper)
≤ 0.001 %
Hg (Mercury)
≤ 0.0001 %
Pb (Lead)
≤ 0.0002 %
Zn (Zinc)
≤ 0.001 %
Aldehydes (as Acetaldehyd)
≤ 0.15 %
Residual solvents (Ph.Eur./USP/ICH) class 3
≤ 0.5 %
Other residual solvents (Ph.Eur./USP/ICH)
excluded by production process
Thermal stability (105 °C)
No coloration
Loss on drying
≤ 0.5 %
Water
≤ 0.5 %
Sulfated ash
≤ 0.2 %
Residues of metal catalysts or metal reagents acc. to EMEA/C HMP/SWP/4446/2000 are not likely to be present.
conform Ph Eur, BP, NF, FCC, E 200